Automated Sensor Based Cutting Machine Design for Pipes And Bar
Abstract
This is an automation based cutting process, it consists of cutting of
bar at certain distance. Bar, pipe or any shape pipe can be cut by using this
machine without more effort and saving valuable time in manufacturing process.
This machine has automatic clamping. Now days, there are wide verity of wire
products like welding electrode, weld mesh, heat treated kitchen baskets,
automobile spark plugs and exhaust valves etc. For manufacturing all above
products, wire is used as primary element and is to be straightening from coil
form. Now straighten wire is to be cut into wire rod as per required length.
For these sequential operations, wire straightening cutting machine is used.
Now days, conventional type wire straightening cutting machine are being used in
which wire is cut by stopper cutter head which is limited by its length as well
as feeding speed. This machine can be widely applied in almost all type of
industries. The pipe cutting process is a main part of the all industries.
Normally the cutting machine is manually hand operated one for medium and small
scale industries. In our project is pneumatically operated Typical Pipe Cutting
Machine. Automation in the modern world is inevitable. Any automatic machine
aimed at the economical use of man, machine, and material worth the most. In
our project is hand operated D.C valve and flow control valve is used for
semi-automation. The pipe cutting machine works with the help of pneumatic
double acting cylinder.
Country : India
1 Manasa Konda
Associate Professor, Department of Electronics and Communication Engineering, Malla Reddy College of Engineering for Women, Hyderabad -500100, Telangana, India
IRJIET, Volume 1, Issue 2, November 2017 pp. 20-22
Balashanmugm
and G. Balasubramanian :- Design and Fabrication of Typical Pipe Cutting
Machine, IJRDO- Journal Of Mechanical And Civil Engineering.
Kshirsagar
Prashant, Rathod Nayan, Rahate Prashant, Halaye Prashant, Surve, Sachin,
Theoretical Analysis of Multi-Way Power Hacksaw Machine.
Shinde
Vaibhav Kailasingh, Ahiwale Anish Jahagirdar, Kuldip and Sutar Onkar, Automatic
Pipe/ Rod Slitting Machine (Pneumatically Controlled), International Journal of
Advanced Mechanical Engineering.
Dr. S. V.
Deshmukh, Automation Sensor Based Automatic Feeding Cutting Machine,
International Journal of Research In Science & Engineering.
Ramkumar
Chandekar ,Tushar Deurmalle, Pravin Bhaga, Shivam Pawar , Dr. S. V.Deshmukh,
Automation Sensor Based Automatic Feeding Cutting Machine, International
Journal of Research In Science & Engineering e-ISSN: 2394-8299 Special
Issue 6-ICRTEST January (2017).
Dinesh
Lamse, Akash Navghane, Rahul Chavhan and Ajay Mahawadiwar, International
Research Journal of Engineering and Technology, IJERT Publishers, (2017).
Mr.
ShubhkumarBandari et al, International Journal of Pure and Applied Research in
Engineering and Technology, IJPERT publishers, (2014).
Vishal
Tambat, Nilkanth Rane, Omkar Savant and Pankaj Yadav, International Journal of
Recent Research in Civil and Mechanical Engineering, IJRRCME, (2015)
