International Research Journal of Innovations in Engineering and Technology - IRJIET International Open Access, Monthly, Peer Reviewed, Reputed Journal ISSN (online): 2581-3048

Impact Factor (2025): 6.9

DOI Prefix: 10.47001/IRJIET

Wind Energy Conversion System with DFIG and STATCOM for Optimized Integration of Wind Power into Transmission and Distribution System

Abstract

The aim of this paper is to present modeling and simulation of wind turbine driven doubly-fed induction generator. There are two pulse width modulated voltage source converters are connected back to back between the rotor terminals and utility grid via common dc link. In this paper the performance of DFIG wind system during dynamic loading and in various fault conditions are analyzed at variable wind speed. The performance of DFIG wind system during dynamic loading and in various fault conditions are analyzed at variable wind speed. This project is a small step forward and gives the benefits of static synchronous compensator (STATCOM) for wind farm integration based on DFIG. To generate reference voltage for a static compensator (STATCOM) operating in voltage control mode. The proposed individual wind turbine using STATCOM of dynamic wind farm electric network, of a Power Flow Control of DFIG Generators for Wind Turbine Variable Speed using STATCOM is connected to the grid. The control capability of the wind farm that is a critical issue in paining and working of the wind system. The dc link capacitor to exchange the power with the three phase feeders, the power-quality issues by providing load balancing and voltage regulation on the load can be satisfied with the proposed method.

Country : India

1 S.Anandajothi2 S.Karthick

  1. PG Scholar, The Kavery Engineering College, Mecheri, Tamilnadu, India
  2. Assistant Professor, The Kavery Engineering College, Mecheri,Tamilnadu, India

IRJIET, Volume 2, Issue 1, March 2018 pp. 15-19

Full Paper
Download

References

  1. H. Li and Z. Chen, “Overview of different wind generator systems and their comparisons,” IET Renew. Power Gen., vol. 2, no. 2, pp. 123–138, Jun. 2008.
  2. S. Soter and R. Wegener, “Development of induction machines in wind power technology,” in Proc. IEEE Int. Elect. Mach. Drives Conf., Antalya, Turkey, May 2007, pp. 1490–1495.
  3. J. A. Baroudi, V. Dinavahi, and A. M. Knight, “A review of power converter topologies for wind generators,” in Proc. IEEE Int. Conf. Elect. Mach. Drives, San Antonio, TX, USA, May 2005, pp. 458–465.
  4. S. Heier, Grid Integration of Wind Energy Conversion Systems. London, U.K.: Wiley, 2006.
  5. M. Stiebler,Wind Energy Systems for Electric Power Generation. Berlin, Germany: Springer-Verlag, 2008.
  6. K. Tan and S. Islam, “Optimum control strategies in energy conversion of PMSG wind turbine system without mechanical sensors,” IEEE Trans. Energy Convers., vol. 19, no. 2, pp. 392–399, Jun. 2004.
  7. G. Abo-Khalil and D. C. Lee, “MPPT control of wind generation systems based on estimated wind speed using SVR,” IEEE Trans. Ind. Electron., vol. 55, no. 3, pp. 1489–1490, Mar. 2008.
  8. P. Guo, “Research of a new MPPT strategy based on gray wind speed prediction,” in Proc. 2nd Int. Symp. Knowl. Acquis. Model., Wuhan, China, Nov. 2009, pp. 120–123.
  9. X. Gong, X. Yang, andW. Qiao, “Wind speed and rotor position sensorless control for direct-drive PMG wind turbine,” in Conf. Rec. IEEE IAS Annu. Meeting, Houston, TX, USA, Oct. 2010, pp. 1–8.
  10. Y. Jia, Z. Yang, and B. Cao, “A new maximum power point tracking control scheme for wind generation,” in Proc. Int. Conf. Power Syst. Technol., Kunming, China, Oct. 2002, pp. 144–148.

Copyright @ 2026-2017 IRJIET. All Right Reserved.

Developed by Byzero Technologies