International Research Journal of Innovations in Engineering and Technology - IRJIET International Open Access, Monthly, Peer Reviewed, Reputed Journal ISSN (online): 2581-3048

Impact Factor (2025): 6.9

DOI Prefix: 10.47001/IRJIET

Enhancing UHF RFID Performance on Human Skin: Design and Simulation Strategies

Abstract

This work describes the procedure for the design and fabrication of body mounted Radio Frequency Identification (RFID) tags. Tags of this nature usually face various challenges due to the unique nature of the body which interferes with normal tag operation. In this work, examines various issues the human body can present to the operation of body mounted RFID tag such as detuning and loss of power due to energy absorption by the water molecules present in the body. Various considerations for the design of a functional RFID that operates optimally when placed directly on the human skin are presented. A slot design was used to demonstrate how an accurate prototype can be developed when design and simulation guidelines are adopted. Simulation and measured results show a high degree of agreement.

Country : Nigeria

1 D.O Oyeka2 N.C Asiegbu3 T.I Ozue

  1. Department of Electronic Engineering, University of Nigeria, Nsukka, Nigeria
  2. Department of Electronic Engineering, University of Nigeria, Nsukka, Nigeria
  3. Department of Electronic Engineering, University of Nigeria, Nsukka, Nigeria

IRJIET, Volume 5, Issue 10, October 2021 pp. 70-73

doi.org/10.47001/IRJIET/2021.510012

Full Paper
Download

References

  1. S. Milici, S. Amendola, A. Bianco, and G. Marrocco, “Epidermal RFID passive sensor for body temperature measurements,” RFID Technology and Applications Conference (RFID-TA), 2014 IEEE, pp. 140–144, 2014, doi: 10.1109/RFID-TA.2014.6934216.
  2. S. Amendola, R. Lodato, S. Manzari, C. Occhiuzzi, and G. Marrocco, “RFID Technology for IoT-based Personal Healthcare in Smart Spaces,” IEEE Internet of Things Journal, vol. PP, no. 99, pp. 1–1, 2014, doi: 10.1109/JIOT.2014.2313981.
  3. “Market Reports - RFID Market.” Accessed: Apr. 28, 2021. [Online]. Available: https://www.marketsandmarkets.com/Market-Reports/rfid-market-446.html
  4. K. V. S. Rao, P. V. Nikitin, and S. F. Lam, “Antenna design for UHF RFID tags: A review and a practical application,” Antennas and Propagation, IEEE Transactions on, vol. 53, no. 12, pp. 3870–3876, Dec. 2005, doi: 10.1109/TAP.2005.859919.
  5. T. Kellomäki, “On-body performance of a wearable single-layer RFID tag,” IEEE Antennas and Wireless Propagation Letters, vol. 11, pp. 73–76, 2012, doi: 10.1109/LAWP.2012.2183112.
  6. J. Virkki, Z. Wei, A. Liu, L. Ukkonen, and T. Björninen, “Wearable Passive E-Textile UHF RFID Tag Based on a Slotted Patch Antenna with Sewn Ground and Microchip Interconnections,” Int J Antennas Propag, vol. 2017, no. 1, p. 3476017, Jan. 2017, doi: https://doi.org/10.1155/2017/3476017.
  7. K. Koski, E. S. Lohan, L. Sydänheimo, L. Ukkonen, and Y. Rahmat-Samii, “Electro-textile UHF RFID patch antennas for positioning and localization applications,” in 2014 IEEE RFID Technology and Applications Conference (RFID-TA), 2014, pp. 246–250. doi: 10.1109/RFID-TA.2014.6934237.
  8. C. Luo, I. Gil, and R. Fernández-García, “Wearable Textile UHF-RFID Sensors: A Systematic Review,” Materials, vol. 13, no. 15, 2020, doi: 10.3390/ma13153292.
  9. M. Wagih, Y. Wei, A. Komolafe, R. Torah, and S. Beeby, “Reliable UHF Long-Range Textile-Integrated RFID Tag Based on a Compact Flexible Antenna Filament,” Sensors, vol. 20, no. 12, 2020, doi: 10.3390/s20123435.
  10. S. M. Refaat, A. Abdalaziz, and E. K. I. Hamad, “Tri-Band Slot-Loaded Microstrip Antenna for Internet of Things Applications,” Advanced Electromagnetics, vol. 10, no. 1, pp. 21–28, Mar. 2021, doi: 10.7716/aem.v10i1.1514.
  11. R. Roges and P. K. Malik, “Planar and printed antennas for Internet of Things-enabled environment: Opportunities and challenges,” International Journal of Communication Systems, vol. 34, no. 15, p. e4940, 2021, doi: https://doi.org/10.1002/dac.4940.
  12. T. Nagaoka and S. Watanabe, “Postured voxel-based human models for electromagnetic dosimetry,” Phys Med Biol, vol. 53, no. 24, p. 7047, Nov. 2008, doi: 10.1088/0031-9155/53/24/003.
  13. M. Komaritzan, S. Wenninger, and M. Botsch, “Inside Humans: Creating a Simple Layered Anatomical Model from Human Surface Scans,” Front Virtual Real, vol. Volume 2-2021, 2021, doi: 10.3389/frvir.2021.694244.

Copyright @ 2026-2017 IRJIET. All Right Reserved.

Developed by Byzero Technologies