Design and Realization of a Surgical Aspirator

Abstract

This study was carried out in the laboratories of the Biomedical Equipment Technology and Instrumentation and Physical Measurements departments of the Higher Institute of Technology of Mamou. The methodology adopted in this work is based on embedded systems technology. Its objective is the Design and Production of a surgical aspirator. The main results obtained during this work relate to the realization of the electrical diagrams of the power supply, the motherboard, the operation of the algorithm, the determination of the technical characteristics of the vacuum cleaner, the synoptic diagram of operation and the principle of operation. The improvement and popularization of this present device would make it possible to equip the various health structures of the country with surgical aspirators locally at a lower cost.

Country : Guinea

1 Pierre Louis Morpoo Rebeca2 Thierno Ibrahima Barry3 Ansoumane Sakouvogui4 Cellou Kanté5 Mohamed Salif Camara6 Daniel Mamy

  1. Biomedical Equipment Technology Department, Mamou Higher Institute of Technology, Guinea
  2. Biomedical Equipment Technology Department, Mamou Higher Institute of Technology, Guinea
  3. Energy Department, Higher Institute of Technology of Mamou, Guinea
  4. Energy Department, Higher Institute of Technology of Mamou, Guinea
  5. Instrumentation and Physical Measurements Department, Higher Institute of Technology of Mamou, Guinea
  6. Biomedical Equipment Technology Department, Mamou Higher Institute of Technology, Guinea

IRJIET, Volume 5, Issue 4, April 2021 pp. 120-125

doi.org/10.47001/IRJIET/2021.504018

References

  1. ATMOS, Medizin Technik, Aspiration chirurgicale, ATMOS Médical France 3 Allée des Maraîchers 13013 Marseille, www.atmosmed.com, 24p.
  2. Rahi RASOULIFAR, Processus de conception centé utilisateur à base de scenario: Application à la conception d’instruments chirurgicaux innovants en chirurgie mini-invasive, Thèse de doctorat de l’Université Joseph Fourier - Grenoble,  242p, décembre 2009.
  3. Système de gestion des fluides, Serres Saga, Manuel de l'Utilisateur, www.serres.com, Français 6001138 rev 2.1 7/2019, 99p, juillet 2019.
  4. Dieulafoy Georges, traité de l’aspiration des liquides morbides, Paris Masson, 1873.
  5. Martin JP. Les aspirateurs de liquides morbides. Clystère (www.clystere.com), n° 37, 2015.
  6. Dr Jean-Pierre MARTIN, L’histoire des seringues, injecteurs et aspirateurs étudiées comme modèles de l’évolution technologie des instruments médicaux, Mémoire D.U Histoire de la Médecine de l’Université Paris Descartes, 436p, 2017-2018.
  7. TOUOMOU TCHOFFO Eric Landry, Conception et Réalisation d’un Aspirateur Chirurgical à trois bocauxavec batterie, Mémoire de fin d’Etude de cycle Licence de l’Université des Montagnes, Cameroun, 2015, 50p.
  8. République de Guinée, Ministère de la Santé, Etude de collecte des données dans le secteur de la santé en Guinée (Appui à la reconstruction après Ebola dans le secteur de la santé), Agence Japonaise de Coopération International, Rapport Final,  238p, mars 2017.
  9. Texas Instruments SG2524, SG3524 Regulating Pulse-Width Modulators, SLVS077F-April 1977 - Revised, 30p, january 2021.
  10. LSU-Aspirateur de mucosités Laerdal, www.laerdal.com, 8187 Rev D Printed in Norway, Laerdal Medical AS. All rights reserved, 36p, 2011.
  11. Aspirateur Médical de Secrétions Boscarol, OB1000 FA - OB1000 FM, Rev. 08-2020 USMAN1000 2P-FR, 28p, août 2020.