The presented article
is aimed at preventing waste of water, which is in great demand all over the
world today. For this purpose, the existing methods were analyzed and the most
suitable for the system under consideration was selected. A model of the water
temperature control system was developed due to the feedback circuit in the
combi system, devices for the implementation of the system were selected, the
model was assembled on the Arduino UNO and a simulation of the possible result
was performed.
Country : Azerbaijan
1 Mustafa Aghayev2 Kamala Pashayeva
Master Student, Baku Higher Oil School, Baku, Azerbaijan
Associate Professor, Baku Higher Oil School, Baku, Azerbaijan
Obiora Nnene, “Design and construction of a water
conservation system”, University of Cape Town, 2009.
Paolo Roccaro, Pietro Paoro Falciglia, Federico
Vagliasindi, “Effectiveness of water saving devices and educational programs in
urban buildings”, University of Catania, 2011.
McGraw-Hill, “The Electronics Engineers' Handbook,
5th Edition”, 2006.
Karl Johan Astrom, Richard M.Murray “An Introduction
for Scientists and Engineers”, University of California Santa Barbara,
California Institute of Technology, 2007.
Faiq Ahmad Khan, Shibli Nisar, “Design and analysis
of feedback control system”, University of Engineering and Technology, National
University of Computer and Emerging Sciences, 2018.
John Van De Gente, “Feedback Control Systems’,
University of Toronto, 2008.
Stefan Simrock, “Control theory”, DESY, Hamburg
Germany.
Deric P. Jones, “Biomedical sensors”, 2009.
Strouse G. F., “Standard Platinum Resistance
Thermometer Calibrations from the Ar TP to the Ag FP”, National Institute of
Standards and Technology, 2008.
Kerlin, T.W., Johnson, M.P. “Practical
Thermocouple Thermometry 2nd edition”, Research Triangle Park, 2012.
