International Research Journal of Innovations in Engineering and Technology - IRJIET International Open Access, Monthly, Peer Reviewed, Reputed Journal ISSN (online): 2581-3048

Impact Factor (2025): 6.9

DOI Prefix: 10.47001/IRJIET

Assessment of Mechanical Properties of Glass Fiber Polymer Composites

Abstract

In this research work, an E-glass fiber with random oriented reinforced unsaturated polyester resin composite was developed by hand lay-up technique with four different fiber loadings (10, 20, 30 and 40 wt. %). The tensile strength, flexural strength and impact strength of the composites were determined as per ASTM standards. The results clearly indicated an improvement in tensile strength, flexural strength and impact strength of the composites with the increase in fibre loadings.

Country : India

1 P. Senthilkumar

  1. Lecturer, Department of Mechanical Engineering, Valivalam Desikar Polytechnic College, Nagapattinam, Tamilnadu, India

IRJIET, Volume 6, Issue 2, February 2022 pp. 13-17

doi.org/10.47001/IRJIET/2022.602003

Full Paper
Download

References

  1. H. Abdullah, “The effects of weathering on the mechanical properties of glass fiber reinforced plastics (GRP) materials”, IIUM Engineering Journal, Vol. 1, No. 2, pp. 1-6, 2000.
  2. M. R. Sanjay, G. R. Arpitha, L. Laxmana Naik, K. Gopalakrishna and B. Yogesha, “Studies on Mechanical Properties of Banana/E-Glass Fabrics Reinforced Polyester Hybrid Composites”, J. Mater. Environ. Sci. 7 (9), pp.3179-3192, 2016.
  3. Olusegun David Samuel, Stephen Agbo and Timothy Adesoye Adekanye, “Assessing Mechanical Properties of Natural Fibre Reinforced Composites for Engineering Applications”, Journal of Minerals and Materials Characterization and Engineering, 11, pp.780-784, 2012.
  4. R. Velmurugan and V. Manikandan, “Mechanical properties of palmyra/glass fiber hybrid composites”, Composites: Part A, 38 (2007) 2216–2226.
  5. Aramide F. O, Atanda P. O and Olorunniwo O. E,  “Mechanical Properties of a Polyester Fibre Glass Composite”, International Journal of Composite Materials,  2(6): pp.147-151, 2012. doi: 10.5923/j.cmaterials.20120206.06
  6. Leonard, L. W. H. and Wong, K. J. and Low, K. O. and Yousif, B. F.  “Fracture behaviour of glass fibre-reinforced polyester composite”, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 223 (2). pp. 83-89, 2009.  doi:10.1243/14644207JMDA224.
  7. Manjunatha G and Vishnu Kumar K L, “Effect of Polypropylene/Glass Fiber on the Mechanical Properties of Polymer Composites”, International Research Journal of Engineering and Technology, Vol. 03 Issue. 11, pp.342-344, 2016.
  8. N M Kusaseh, D M Nuruzzaman, N M Ismail, Z Hamedon, A Azhari and A K M A Iqbal, “Flexure and impact properties of glass fiber reinforced nylon 6-polypropylene composites”, IOP Conf. Series: Materials Science and Engineering 319 (2018) 012045 doi:10.1088/1757-899X/319/1/012045
  9. Ismail Ibrahim Marhoon, “Mechanical Properties Of Composite Materials Reinforced With Short Random Glass Fibers And Ceramics Particles”, International journal of science & technology research, vol:7, Issue:8 pp.50-53, 2018.
  10. Suhas Yeshwant Nayak, Srinivas Shenoy Heckadka , Linto George Thomas and Anil Baby, “Tensile and Flexural Properties of Chopped Strand E-glass Fibre Mat Reinforced CNSL Epoxy Composites”, MATEC Web of Conferences 144, 02025(2018), https://doi.org/10.1051/matecconf/201814402025.
  11. Edcleide M. Araújo, Kasselyne D. Araújo, Osanildo D. Pereira, Pollyana C. Ribeiro and Tomás J. A. de Melo, “Fiberglass Wastes/Polyester Resin Composites: Mechanical Properties and Water Sorption”, Polímeros: Ciência e Tecnologia, vol. 16, No.4, pp. 332-335, 2006
  12. Mustafa Faisal Zaidan, Khudhayer J. Jadee1 and Salwa A. Abed, “A Study of Bending Property for Glass Fiber Reinforced Thermoplastic Composite Sheets”, International Journal of Scientific Research and Management, Vol.07, Issue.06, pp.EC-2019-254-260, 2019. DOI: 10.18535/ijsrm/v7i6.ec01
  13. J.L. Thomason, “The influence of fibre length and concentration on the properties of glass fibre reinforced polypropylene. 6. The properties of injection moulded long fibre PP at high fibre content”, Composites: Part A 36 (2005), pp.995–1003
  14. M. B. Kulkarni and Hussein Ali Abed, “Studies on Thermal and Mechanical Properties of Glass Fiber-Reinforced Unsaturated Polyester/Benzoxazine Composites”, International Journal of Science and Research, Vol.5 Issue.10, pp.1680 -1685, 2016.

Copyright @ 2026-2017 IRJIET. All Right Reserved.

Developed by Byzero Technologies