In this paper the design and development of pavement pressure sensor-based energy for street lights. The main aim of this paper is to generate the energy through the pressure generated by footsteps. Piezoelectric materials produce electric charge when a stress is applied on it. This phenomenon is known as piezoelectric effect. This effect takes place only in crystals that have no centre of symmetry. The charge produced by the application of stress can be can be manipulated as per our need. This micro controller setup is placed at foot path when a person walking along the foot path the footsteps of the person generate some pressure and that pressure generated by the person is noted down by the pressure transducer connected to the micro controller the pressure generated at the transducer is converted into the electrical energy and that energy is stored into the battery connected to it. This energy can be used to the street light to turn it on during night times the street light can be switch on automatically without any human effort by simply setting on and off time in RTC. By using this we can develop extra energy without wasting the other resources. Lot of energy is wasted for the street lights as they don’t switch off at the right time and if this project is implemented in areas where there is lot of pedestrian floating in busy areas and railway stations, power is cost effectively saved as there will be no need of separate power supply from the power stations to the street.