One of an automobile's most crucial parts is the braking system. The purpose of this effort is to develop a brake failure indicator-equipped safe braking system. Most brake failures are caused by brake shoe wear and liner cuts. There are two sensors in it, one of which is connected to the brake shoe and the other to the brake liner. To a microcontroller is given the signal from both sensors. When the brake shoe is worn out or if the brake liner is cut, the sensor sends a signal to the microcontroller. After analysing the signal, the microcontroller activates the matching indicator. The green indication illuminates when there are no defects everywhere, whereas the red indicator illuminates when there are brake shoe or brake liner issues.