International Research Journal of Innovations in Engineering and Technology - IRJIET International Open Access, Monthly, Peer Reviewed, Reputed Journal ISSN (online): 2581-3048

Impact Factor (2025): 6.9

DOI Prefix: 10.47001/IRJIET

Application of Microcontroller/LCD Interface for Real-Time Systems

Abstract

This paper analyzes the way Liquid Crystal Display (LCD) is interfaced to a microcontroller for information display in realtime systems. To achieve this purpose, a background study of LCD and microcontroller was x-rayed. The LM016L type of LCD (an alphanumeric LCD) was used as a case study of the LCD for the analysis, while AT89C51 microcontroller was used as a case study of the microcontroller analyzed. It was seen that by programming a microcontroller adequately to execute LCD Command and Data write codes, information (alphabets and numbers) could be displayed on the LCD. The interface program was developed in Assembly language, and the output of the interface was displayed in a Proteus environment.

Country : Nigeria

1 Dimson I.C.2 Ani A.A.3 Mathias P.E.4 Obi M.C.

  1. Department of Electronic and Computer Engineering, Nnamdi Azikiwe University, Awka, Nigeria
  2. Department of Computer Engineering, Madonna University of Nigeria, Akpugo Campus, Enugu State, Nigeria
  3. Department of Electronic and Computer Engineering, Nnamdi Azikiwe University, Awka, Nigeria
  4. Department of Computer Engineering, Caritas University, Enugu, Nigeria

IRJIET, Volume 8, Issue 9, September 2024 pp. 259-265

doi.org/10.47001/IRJIET/2024.809030

Full Paper
Download

References

  1. Hall D. V., “LCD Principles and Applications”, MCGraw Hill Inc., NewYork, 2009, Pp 3-25.
  2. Cottle J. G., “LCD Interfacing and Programming”, Scientific Educational Systems, Lagos, 2007.
  3. Schuster A., “Microcontroller Principles and Applications”, Maxon Press Ltd, Rochester, 2008.
  4. Predko Myke, “Handbook of Microcontrollers”, McGraw Hill, New York, USA, 2007, Pp 1-17.
  5. Douglas V.H., “Microcontrollers and Interfacing: Programming Hardware”, McGraw Hill Inc, New York, 2008, Pp 270-344.
  6. Holliday D. and Resmick Robert, “Fundamentals of Microcontrollers”, Don Peters Press Ltd, Fulmar, 2008, P 88.
  7. Katz P., “Digital Controls Using Microcontrollers”, Prentice Hall International Inc, New Delhi, 2009, Pp 15-43.
  8. Wakerly John F., “Digital Designs: Principles and Practices”, 4th Edition, PHI Learning Private Limited, New Delhi, 2008, Pp 5-6.
  9. Floyd T.F., “Digital Fundamentals”, 6th Edition, Prentice-Hall International Inc, New Delhi, 2008, Pp 4-7.
  10. Allen L., Wyatt, “Using Assembly Language”, 3rd Edition, Que Corporation, 11711N, College Avenue, Carmel, USA, 2009.

Copyright @ 2026-2017 IRJIET. All Right Reserved.

Developed by Byzero Technologies