International Research Journal of Innovations in Engineering and Technology - IRJIET International Open Access, Monthly, Peer Reviewed, Reputed Journal ISSN (online): 2581-3048

Impact Factor (2025): 6.9

DOI Prefix: 10.47001/IRJIET

Experimental Study of Thermal Performance of Air-Cooled Cross-Flow Heat Exchanger

Abstract

This study aims to evaluate the effect of variations in Re_D and heating power on the thermal characteristics of a tube bundle. Tests were conducted using a test model with a channel cross-section of 150 mm × 150 mm and a length of 1540 mm, equipped with an air-driven fan and heating elements with varying power of 10 W, 20 W, and 30 W. The main parameters analyzed were the convection heat transfer coefficient (h) and the Nusselt number (Nu) as a function of Re_D and P. The results showed that increasing Re_D significantly increased h and Nu at all power levels, especially at high Re_D which produced maximum heat transfer due to the strengthening of turbulence effects. Increasing heating power also contributed to the increase in h and Nu, but the effect of Re_D was more dominant on the thermal performance of the system. The combination of high flow rates and large heating power was proven to maximize heat transfer efficiency in the tube bundle configuration.

Country : Indonesia

1 Khoiri Rozi2 Berkah Fajar TK3 Dimas Gerald Ikhwanul Mukmin

  1. Mechanical Engineering, Diponegoro University, Jl. Prof. H. Soedarto, SH, Tembalang, Semarang 50275, Indonesia
  2. Mechanical Engineering, Diponegoro University, Jl. Prof. H. Soedarto, SH, Tembalang, Semarang 50275, Indonesia
  3. Mechanical Engineering, Diponegoro University, Jl. Prof. H. Soedarto, SH, Tembalang, Semarang 50275, Indonesia

IRJIET, Volume 9, Issue 9, September 2025 pp. 30-33

doi.org/10.47001/IRJIET/2025.909005

Full Paper
Download

References

  1. Moazezi, A., & Lavasani, A. M. (2025). The impact of spacing ratios on thermal hydraulic performance of a cam-shaped tube in a four-tube staggered configuration. International Communications in Heat and Mass Transfer, 164, 108869.
  2. Master B.I., Chunanged K.S., Boxma A.J., Kral D., and Stehlik P.. (2006). Most frequently used heat exchanger from pioneering research to world wide application. Heat Transfer Engineering, 27(6). pp. 4-11.
  3. HoSung Lee. (2010). Thermal design – heat sinks, thermoelectrics, heat pipes, compact heat exchanger and solution, John Wiley & Son, Inc..
  4. Tepe, A. Ü., & Yilmaz, H. (2022). Thermal–hydraulic performance of the circular-slice-shaped-winglet for tube bank heat exchanger. International Journal of Thermal Sciences, 179, 107711.
  5. Marzouk, S. A., Al-Sood, M. M. A., El-Said, E. M. S., Younes, M. M., & El-Fakharany, M. K. (2023). A comprehensive review of methods of heat transfer enhancement in shell and tube heat exchangers. Journal of Thermal Analysis and Calorimetry, 148(15), 7539–7578.
  6. Incropera F.P. and Dewitt D.P., 2004, Fundamental of heat and mass Transfer, 5th ed. New York: John Wiley and Sons Inc., 2004.
  7. Vahidinia, F., & Miri, M. (2015). Numerical study of the effect of the Reynolds numbers on thermal and hydrodynamic parameters of turbulent flow mixed convection heat transfer in an inclined tube. Strojniški Vestnik – Journal of Mechanical Engineering, 61(11), 669–679.
  8. Khan, Z., Riffat, S., & Wei, Z. (2018). Experimental study on heat transfer enhancement in a heat exchanger with a helical coil tube. International Journal of Heat and Mass Transfer, 118, 345-35
  9. Shih, L., Wang, W., & Lee, C. (2018). The effect of tube arrangement on the performance of heat exchangers. International Journal of Heat and Mass Transfer, 118, 1236-1243.
  10. Wang, Z., Wang, Y., & Shi, J. (2021). Experimental study on thermal performance and pressure drop in tube heat exchangers with various tube configurations. Energy, 213, 118723.
  11. Yang, W., Zhang, H., & Chen, X. (2020). Effect of transverse and longitudinal tube arrangement on heat transfer performance of heat exchangers. Applied Thermal Engineering, 175, 115548.
  12. Kumar, R., Yadav, S., & Kumar, V. (2018). Experimental investigation of heat transfer in heat exchangers with various tube arrangements. International Journal of Thermal Sciences, 130, 79-91.
  13. Zhang, L., Li, J., & Wei, X. (2020). The effect of helical tube heat exchangers on heat transfer and pressure drop. Applied Thermal Engineering, 174, 115229
  14. Kumar, S., Pandey, A., & Yadav, M. (2019). Performance of spiral coil insert in heat exchanger for enhancement of heat transfer. International Communications in Heat and Mass Transfer, 106, 22-30.
  15. Ibrahim, M., Sadegh, M., & Zaki, A. (2017). Thermal performance analysis of non-cylindrical tube arrangements in a heat exchanger. International Journal of Heat and Mass Transfer, 107, 145-156.
  16. Saini, R., Kumar, S., & Prasad, B. (2019). Investigation of tube multi-fin arrangements for improved heat transfer performance in heat exchangers. International Journal of Heat and Mass Transfer, 139, 174-186.

Copyright @ 2026-2017 IRJIET. All Right Reserved.

Developed by Byzero Technologies